Your shopping cart is empty!
| 10 or more | $59.61 |
| 50 or more | $57.73 |
| 100 or more | $55.22 |
SQM®4 system-on-module with a universal microcontroller i.MX RT1062 or i.MX RT1064. This popular microcontroller powered by the well-established ARM® Cortex® M7 core, clocked at 600 MHz, is suitable for a wide range of control and measurement applications with graphical LCD, USB and wired/wireless network connectivity. Wide support of RTOSes (e.g. FreeRTOS, SaveRTOS, OpenRTOS) and availability of baremetal examples allows quick and comfortable development while keeping all system resources under full control.
With 1 MB on-chip SRAM, 32 MB SDRAM memory, 8 and more MB NOR FLASH, 100 Mbit Ethernet PHY, low power RTC, 4 or more GB eMMC memory, 2D graphics acceleration engine and LCD display controller, parallel camera interface, EEPROM, USB PHY and a wide range of other peripherals, interfaced via RIM®, the module is ready to simplify, cheapen and speed up your development.
The module is offered in three variants:
For quick start with the SQM4-RT6 module we recommend to use EasyBoard, a development board expanding the most of the peripherals available on the module. The board itself illustrates how usage of SQM4 modules serie allows to produce full-fledged embedded device on a simple two-layer board.
| Filename | Description | Date added | Download link | |
|---|---|---|---|---|
| SQM4_footprint | Footprint of SQM4 for PCB layout | 2014-03-27 19:37:50 | SQM4_footprint.pdf | |
| SQM4-RT6 Datasheet | SQM4-RT6 is a solderable computer module based on the new NXP ARM Cortex M7 microcontroller i.MX-RT series. It runs at up to 600 Mhz and consumes as little as 250mW. | 2019-09-05 10:50:16 | To download this file you must be logged! | |
| SQM4-RT6-PCB | SQM4-RT6 module PCB | 2019-09-05 10:58:09 | To download this file you must be logged! | |
| SQM4-RT6-SCH | SQM4-RT6 module schematic | 2019-09-05 10:58:57 | To download this file you must be logged! | |
| SQM4_SCH_DECAL_Lib | Design Library for PADS, ORCAD, EAGLE and ALTIUM | 2015-10-06 09:36:09 | To download this file you must be logged! | |
| EasyDemo | Out of the box demo application for SQM4-K70 modules. Version 2.01 with updated Getting Started document. | 2014-10-19 18:55:45 | To download this file you must buy this product! |
| i.MX RT1062/1064 | Processor at the NXP website |
| NOR Flash Memory | NAND Flash at the Micron website |
| KSZ8081NL | 100 Mbit Ethernet PHY at the Microchip website |
| eMMC | eMMC Flash memory Swissbit |
| 25AA256 | SPI EEPROM at the Microchip website |
| FreeRTOS demo | SQM4-RT6-EasyBoard demo from the FreeRTOS.org website |
There are some files to download. If you purchased this product, you can find available files here.
| Processor | |
| Part | IMXRT1064 |
| Core | ARM Cortex M7 |
| Frequency | 600 MHz |
| SRAM | 1 MB |
| FPU | VFPv4 |
| Security | MPU, CRC, RNG, mmCAU, Tamper, Watchdog |
| Memory | |
| Flash On Chip | 4 MB |
| DDR On Module | 32 MiB (16 M x 16) |
| NAND On Module | 4 GB |
| EEPROM On Module | 32 KiB (optional) |
| Networking | |
| Ethernet | 1x 100 Mbit PHY |
| Display and Multimedia | |
| RGB | 1x 16-bit, up to VXGA |
| Connectivity | |
| USB | 2x 2.0 OTG PHY |
| MMC/SD | 1x |
| UART | 6x |
| I2C | 2x |
| SPI | 3x |
| I2S, ESAI | 1x |
| CAN | 3x |
| GPIO | up to 73x |
| Electrical | |
| Supply Voltage | 3.3 V to 5.5 V DC |
| Supply Current | 80 mA |
| Output Voltage | 3.3 V (3.3<Vin<5.5V) |
| Output Current | 0 to 100 mA |
| Mechanical | |
| Dimensions (W x H x D) | 43 mm x 43 mm x 5.5 mm (8.5mm with JTAG Con) |
| Weight | 65 g |
| Condition | |
| Operating Temperature | -40 °C to +85 °C |
| Operating Ambient Humidity | 10 to 90 % RH |
| Storage Temperature | -40 °C to +105 °C |
| Storage Humidity | 10 to 90 % RH |
